Free Switch Plate Included!!
Factory Finish Matching! Matches the Factory ESC Case!
1 side is matching finish the other is a smooth finishCan turn the plate to have switch on the sides or over the back (Most Common)So Nice to Have the esc ON/OFF Switch securely Mounted!
ALL NEWHobbywing Max 5 G2 Sensored ESC up to 12s esc(1) Male QS8 Attached
Choose to ADD Series Harness or No Wire Series
Bec = 6v, 7.4v, 8.4v250 ampSensored or SensorlessMotor Capable
8mm female bullets for motor connection
Bottomline
- The ESC uses a special process, coupled with an innovative waterproof design, to increase waterproofing and dust-proofing performance in different climates. It is easy to deal with the harsh conditions containing sediment, ice and snow, water accumulation.
- Built-in ultra-powerful switch mode BEC with a continuous current of 8A, an instant 25A, and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos.
- Supports turbo timing setting, the timing response is remarkable when used with the matching motor(such as EZRUN 56118SD G2 Sensored brushless motor).
- Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection.
- Supports LED program card, LCD G2 program box, OTA programmer (Note: optional) to set the parameters of the ESC.
- Data logging function to view various running data on the HW LINK app using the OTA Bluetooth module.
- Supports the firmware upgrade of the ESC (The multi-function LCD G2 program box or OTA Programmer is needed to purchase), you can enjoy the latest functions
Motor Limits*: With 8s Lipo: KV<1200
WIth 12s Lipo: KV<800 56118 size motor
Note *: The range of KV value here is the recommended value under the standard application (combined with the rpm supported by the motor and the actual load of the whole vehicle), and does not represent the maximum rpm supported by esc.
No Motor Wires Included
New G2 Hobbywing Max 5 SD ESC QS8 Attached Select Your Harness Ready to Run
ESC Has (1) QS8 Male Attached Approx 3.5" of Wire To Connector
CHOOSE To Add A Series Harness Or No Wire Series
Harness Options:
All Harness Options Doubles Battery Voltage
All Series Harnesses have
(1) Female Connector
to
(2) Male Connectors
(NO HARNESS OR PLUG)
(1) QS8 Male
attached to esc
A
(1) QS8 Male
attached to esc
Includes:
QS8 Series Harness
8 awg wire
1 1/2" Wire Lengths
B
(1) QS8 Male
attached to esc
Includes:
QS8 Series Harness
8 awg wire
3" Wire Lengths
C
(1) QS8 Male
attached to esc
Includes:
QS8 Series
No Wire Plug
D
(1) QS8 Male
attached to esc
Includes:
QS8 to EC5/IC5
Series Harness
10 awg wire
1 1/2" Wire Lengths
E
(1) QS8 Male
attached to esc
Includes:
QS8 to EC5/IC5
Series Harness
8 awg wire
3" Wire Lengths
F
(1) QS8 Male
attached to esc
Includes:
QS8 to XT90
Series Harness
8 awg wire
3" Wire Lengths
G
(1) QS8 Male
attached to esc
Includes:
QS8 to XT90
No Wire Plug
H
(1) QS8 Male
attached to esc
Includes:
QS8 to Fits Traxxas Connectors
Series Harness
8 awg wire
3" Wire Lengths
Fits Traxxas Connectors (ALL)