top of page
Hobbywing EzRun Max 8 G2 Sensored ESC (up to 6S)
Free Switch Plate Included!!
Factory Finish Matching! Matches the Factory ESC Case!
1 side is matching finish the other is a smooth finish
Can turn the plate to have switch on the sides or over the back 
(Most Common)
So Nice to Have the esc ON/OFF Switch securely Mounted!
 
Max 8 G2 comes with XT90 Series Harness,
but you have the option of changing the connector.
 
Choose Your Connector!
 
Series Harnesses Use a 4" Red 10 awg
Jumper Wire Doubles Battery Voltage
 
EXCEPT The XT90 Series
The Jumper Wire Is Longer
(Stock Length From Factory)
 
For single attached
XT90, EC5/IC5, & QS8 connectors
there is approximately 5" of wire to the connector
 
  • The ESC uses a special process, coupled with an innovative waterproof design, to increase waterproofing and dust-proofing performance in different climates. It is easy to deal with the harsh conditions containing sediment, ice, snow, and water accumulation.
  • Built-in ultra-powerful switch mode BEC with a continuous current of 6A, an instant 15A, and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos.
  • Equipped with the most advanced and safe electronic switches. The traditional mechanical switch protects and prevents dust, humid and other harsh environments, contact rust, and violent impact (such as flying slope landing) caused by the automatic closure of mechanical switches and other issues.
  • Support the 32-degree turbo timing setting. When used with the matching motor (such as EZRUN 4278SD), the maximum rpm can be increased by about 25%, easily winning your rival. • Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, and current protection.
  • Support LED program card, LCD G2 program box, OTA programmer (Note: optional) to set the parameters of the ESC.
  • Real-time data logging to view various running data on the HW LINK app using the OTA Bluetooth module.
  • Support the firmware upgrade of the ESC (The multi-function LCD G2 program box or OTA Programmer is needed to purchase), you can enjoy the latest functions.

Hobbywing EzRun Max 8 G2 Sensored ESC (up to 6S)

SKU: MAX8
$149.99Price
  • MAX 8 G2 (2022)                
    Scale Vehicles 1/8th 
    Cont./Peak
    Current    		 160A / 1050A
    Motor Mode Sensored and sensorless brushless motor
    Input 3-6S Lipo
    Motor Limit 4S Lipo: KV≤3000; 6S Lipo: KV≤2400
    4278 size motor
    BEC Output  

    6V / 7.4V / 8.4V adjustable, continuous

    current 10A (Switch-mode)
    Programming
    Port    		 Share with Fab interface
    Switch Mode Electronic Switch
    Capacitor
    protection    		 Yes
    Waterproof Yes
    Size (L.W.H)
    mm    		 60(L)x48(W)x40.5(H)mm
    Weight (g) 192g
    Input/Output Input：XT90 Output：6.5mm gold plug（female）
bottom of page